Production of a design developed for the assembly filter parts, optimization of welding and field test

Simple item page
dc.authoridMADEN, Hakan/0000-0002-0912-7310
dc.contributor.authorMaden, Hakan
dc.contributor.authorÇetinkaya, Kerim
dc.date.accessioned2024-08-20T20:29:21Z
dc.date.available2024-08-20T20:29:21Z
dc.date.issued2022
dc.departmentAntalya Belek Üniversitesien_US
dc.description.abstractFor the joining of non-removable plastic parts, methods such as friction welding, friction-stir welding, ultra-sonic welding, chemical joining, and hot-plate welding are used. Rotary friction welding is generally used for joining the filter parts of water treatment devices. After the rotating friction welding of the filter parts, semi-melted agglomerations are formed in the inner parts. To prevent semi-melted accumulation, a weld joint profile design was developed in the ABAQUS software in a previous study. In this study, injection moulds had been produced according to weld joint profile design. The taken plastic presses were welded with the friction welding machine and the joint was controlled and compared. It is seen that the semi-melted agglomeration was successfully confined. By performing Taguchi experimental method and ANOVA analysis on friction welding machine parameters, the optimum pressure conditions were determined in order to carry out static and dynamic tests according to NSF standards and field tests by producing 1500 pilot products, and it has been put into use. The lifetime of the developed filter depends on the material which was used in the manufacture. The next study is aimed to improve the lifetime of the developed filters.en_US
dc.identifier.doi10.5545/sv-jme.2022.255
dc.identifier.endpage668en_US
dc.identifier.issn0039-2480
dc.identifier.issue11en_US
dc.identifier.scopus2-s2.0-85143612860en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage657en_US
dc.identifier.urihttps://doi.org/10.5545/sv-jme.2022.255
dc.identifier.urihttps://hdl.handle.net/20.500.14591/124
dc.identifier.volume68en_US
dc.identifier.wosWOS:000941666600001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherASSOC MECHANICAL ENGINEERS TECHNICIANS SLOVENIAen_US
dc.relation.ispartofStrojniski Vestnik-Journal Of Mechanical Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectrotary friction weldingen_US
dc.subjecttaguchi experimental methoden_US
dc.subjectANOVA analysisen_US
dc.subjectsemi-melt agglomerationsen_US
dc.subjectNSF water purificationen_US
dc.subjectfield testen_US
dc.subjectstatic and dynamic testingen_US
dc.titleProduction of a design developed for the assembly filter parts, optimization of welding and field testen_US
dc.typeArticleen_US

Files

Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
hakan-maden.pdf
Size:
2.29 MB
Format:
Adobe Portable Document Format
Download

Collections

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu